To Visit Velleman* Click Below
This is only a Partial Listing of Velleman Products Available!
If you don't see what you are looking for please Call:
781-449-1005
Or
E-mail:
*The link above will take you from the "You-do-it" Electronics Website. You may encounter Sites which use cookies. Please use these links @ your own risk. Although every effort has been made to check the content of the sites above,"You-do-it" Electronics cannot be responsible for content contained in the websites which are linked above.
|
K6712 Thru K7102
|
|
IR REMOTE CONTROLLED DIMMER
Order Code : K6712
This one channel IR receiver/dimmer works together with the 15 channel IR transmitter (K6710). The receiver code can be set to 1 of the 15 transmitter codes so that 15 receivers can be operated (K6712 and/or K6713) independently of each other. Thanks to its compact design this kit fits into a standard light switch housing.
Specifications
 max. load : 2A (4A with heatsink)
 supply voltage : 220VAC 50/60Hz (110VAC possible)
 transmitter / receiver distance : max. 7m (23')
 not suitable for halogen lights
Hints
 If the supply voltage is 110V, you must fit a 1uF (min 200V) capacitor for C13.
YDI Price $59.99
|
|
|
1-CHANNEL IR RECEIVER
Order Code : K6713
This single channel IR receiver works together with the K6710 15 channel IR transmitter. The receiver code can be set to 1 of the 15 transmitter codes, so that 15 receivers can be operated (K6712 and / or K6713) independently of each other.
Specifications
 transmitter / receiver range : up to 9m (29.5')
 relay output : 240V / 5A (switch or pulse contact)
 supply voltage : 220VAC (110VAC possible)
YDI Price $49.95
|
|
|
UNIVERSAL RELAY CARD WITH 16 RELAYS
K6714-16
16 relays and screw connectors included ! Power supply transformer is included. Output 12V CC can be used as a power supply for other kits: K6714, K8023,... Every output of the print can be equipped with a noise suppressor network.
Specifications
 the relays can be controlled in different ways: direct control from open-collector outputs, TTL or CMOS level
 DIP switches are included to allow manual activation of the relays in case of maintenance work
 16 relay outputs
 contact: 10A / 28V DC or 125V AC, max. 5A at 230V AC
 power supply: 125V AC max. 12VA
 output voltage: 12V / 250mA
 PCB dimensions: 5.9" x 8.4"
YDI Price $99.00
|
|
|
SIGNAL TRACER/INJECTOR
Order Code : K7000
This signal tracer /injector has been designed to inject or detect a specific signal into an audio circuit in need of repair (such as amplifiers, radios, tone controls, …) so as to detect the fault. In this way problems can be traced more easily. The signal tracer may also be used as a simple monitor or amplifier.
Specifications
 independent injector/tracer
 injector :
 0-2.5Vrms output (adjustable)
 output impedance : 1.5Kohm
 frequency : ± 1kHz
 tracer :
 3.5mV to 10Vrms sensitivity (adjustable)
 gain : 40dB
 input impedance : 50Kohm
 output power : 0.5W / 8ohm
 power supply : 7-9VAC or 9-12VDC / 150mA
 dimensions : 60 x 53mm (2.4" x 2.1")
YDI Price $19.99
|
|
|
LIVE WIRE DETECTOR
Order Code : K7101
With this device wires can be very easily checked for live voltage. It can be used to search for wires installed in or behind walls or to trace interruptions in wiring. A flashing LED indicates whether or not voltage is present. The flashing speed indicates how close by the wire is. If an audible signal is also desired, space has been provided on the PCB for buzzer SV4/12-S to be connected. The PCB has been specially constructed to fit entirely into the separately available box type G407.
Specifications
 detection of mains conducting cables
 LED indication (buzzer optional)
 adjustable detection distance : max. 10cm, 3.9"
 distance indication
 supply voltage : 9V battery (not incl.)
 dimensions : 56 x 64mm (2.2" x 2.5")
YDI Price $12.99
|
Many other Brands Of Kits Are Available!
Bring your Friends & Family to Visit America's Unique Electronic Store.
Prices current 11/8/2008. Prices are subject to change without notice. The kits shown above are typically stocked by "You-do-it" Electronics Center. We try to maintain a current listing of current models. Occasionally products which are out of production may be listed on our website. Please E-mail Sales@youdoitelectronics.com or Call for current availability. Prices are subject to change without notice. All orders are subject to acceptance by this company & our Vendor in accordance with its standard acknowledgement form. All prices are subject to all applicable State and/or Local sales taxes. Terms are MasterCard, Visa, Discover, or American Express or Check with order, unless other arrangements are made with our credit department.
|
|