To Visit Velleman* Click Below
This is only a Partial Listing of Velleman Products Available!
If you don't see what you are looking for please Call:
781-449-1005
Or
E-mail:
*The link above will take you from the "You-do-it" Electronics Website. You may encounter Sites which use cookies. Please use these links @ your own risk. Although every effort has been made to check the content of the sites above,"You-do-it" Electronics cannot be responsible for content contained in the websites which are linked above.
|
K8022 Thru K8029
|
Preamp with RF Remote
Order code : K8022
Features
 two stereo level RCA inputs
 one stereo RCA output to power amp
 motor controlled volume control
 RF remote control for all functions
 the remote does not need to 'see' the receiver
 self-learning code
 range: up to 50ft depending on environment
 manual operation possible
 gold plated RCA connectors
 relay controlled input selection
 totally passive
Specifications
 preamp:
 inputs: 2 (line level)
 output: 1 (line level)
 input impedance: 5Kohm
 output impedance: < 2.5Kohm
 volume control speed: 15 sec. typ. (0 to max. volume)
 power supply: 12V DC / 300mA
 recommended adapter: -
 dimensions: 9.3" x 6.5" x 1.9"
 remote control:
 433MHz operation
 approved design (report BLC/96-0452 according to I-ETS 300 220)
 key chain-style
 battery (not included): 12V type V23GA, GP23A, ...
 dimensions: 1.5" x 0.6" x 2.3"
YDI Price $99.00
|
|
|
10-CHANNEL, 2-WIRE REMOTE CONTROL
Order Code : K8023
This kit allows you to control up to 10 devices using only 2 wires at a long distance. Microprocessor controlled. Inputs can be push-buttons, switches or open collector outputs from another device. The receiver section provides 10 open collector outputs that allow you to control relays directly. Terminal block connectors for all input and output connections are included. All outputs are provided with LED indication. Can be used with our kits : K6711, K8000, K8006,... Can be connected to our standard relay card : K6714
Specifications
 10 open collector outputs : 50V / 100mA
 tested to a distance of up to 50m (55 yards) between control- and receiver section
 operating voltage : single 12-15V AC or DC, 300mA
 dimensions :
 control pcb : 70 x 50 x 16mm (2.7" x 2.0" x 0.6")
 receiver pcb : 103 x 50 x 24mm (4.0" x 2.0" x 1.0")
YDI Price $39.95
|
|
|
PUSHBUTTON CONTROLLED DIMMER
Order Code : K8024
Easy pushbutton up/down control of light sources. A brief push toggles on/off, while continued pushing engages dimming action / memory function maintains preferred level.
Specifications
 soft-start function
 suitable for low voltage halogen lighting
 with fuse and power indicator
 operating voltages : 110-125 or 220-240VAC 50/60Hz
 max. load : 3.5A (750W/220V ; 375W/110V)
 noise suppressed according to EN55015
 dimming speed : approx. 3.5s
 dimensions pcb : 62 x 49 x 38mm (2.4" x 1.9" x 1.5")
YDI Price $29.90
|
Many other Brands Of Kits Are Available!
Bring your Friends & Family to Visit America's Unique Electronic Store.
Prices current 11/8/2008. Prices are subject to change without notice. The kits shown above are typically stocked by "You-do-it" Electronics Center. We try to maintain a current listing of current models. Occasionally products which are out of production may be listed on our website. Please E-mail Sales@youdoitelectronics.com or Call for current availability. Prices are subject to change without notice. All orders are subject to acceptance by this company & our Vendor in accordance with its standard acknowledgement form. All prices are subject to all applicable State and/or Local sales taxes. Terms are MasterCard, Visa, Discover, or American Express or Check with order, unless other arrangements are made with our credit department.
|
|